Michigan Industrial Coating, Inc.
Technical Data
 MIC Acid Sanitizer

GENERAL DESCRIPTION: MIC Acid Sanitizer is an effective no rinse surface cleaner-sanitizer. MIC Acid Sanitizer has applications in farms, dairies and farm use. The product label should be consulted for proper instructions for each application. MIC Acid Sanitizer is EPA registered has the equivalent of a D2 USDA rating. (This product formula was developed after the USDA discontinued analyzing product samples for rating approvals. Equivalent rating is based on knowledge of similar formulas previously analyzed and rated by the USDA.)

PROPERTIES:
Appearance: Clear Liquid
Odor: Sweet Pleasant
Solubility: Complete
Density: 9.7 lbs./gal.
pH @ 100%: 1.0
Rinsability: Complete
EPA Reg. No.: 6836-83-36240

USING PROCEDURE: Product label should be consulted for proper use procedures as they vary depending upon the type of application. Normal dilution is 1 to 2 ounces per 4 gallons of water. Normal wet contact time is 10 minutes.

SAFETY DATA: Concentrated product can be corrosive to human tissue and should be handled accordingly. If product contacts skin or eyes, flush with water for 15 minutes. If irritation persists, seek medical attention. If ingested, drink two or three glasses of water to dilute and seek medical attention immediately. Do not induce vomiting. Keep container closed when not in use. Read the Material Safety Data sheet on this product before using.

 

 

 

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.