Michigan Industrial Coating, Inc.
Technical Data
 MIC-950

GENERAL DESCRIPTION: MIC-950 is a hard working ready-to-use floor, wall, and equipment cleaner for use in all sub-freezing, cold storage and freezer areas with temperature extremes to -44°F. LP-950 effectively removes dirt, grime, fat, and grease deposits from hard surfaces. MIC-950 has an A4 USDA rating.

PROPERTIES:
Odor: Alcohol
pH: 7.5
Flash Point: 60°F
Acids: None
Color: Blue
Shelf Life: 2 year minimum
Alkali: None

USING PROCEDURE:
1. Automatic Scrubbers: Use steel wire or aggressive brushes. Fill tank with cleaner undiluted. Lay down solution with scrubbing action and allow solution to remain on surface for 5 minutes. Scrub again and pick up soiled solution with wet/dry vac or mop.

2. Rotary Floor Machine: Use steel wire or other aggressive brush. Apply solution by spray or mop and allow to soak 5 minutes. Scrub well and pick up with mop.

3. Manual Cleaning: Apply cleaner by spray, mop, or sponge and follow by aggressive double brushing or scrubbing. Pick up with wet/dry vac or mop.

4. Important Instruction on Rinsing: This product may be rinsed at temperatures above 0°F. Always wet/dry vac or mop dry to prevent any resulting residues.

SAFETY DATA: DANGER Flammable if used above 60°F. Keep away from heat, sparks, and open flame. Rinse empty container with water before discarding. POISON: Contains Methanol. Do not take internally. Read the Material Safety Data sheet before using this product.

 

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.