Michigan Industrial Coating, Inc.
Technical Data
 MIC-7800

GENERAL DESCRIPTION: MIC-7800 is a semi-synthetic metalworking fluid designed for stamping, light drawing and other types of metal working operations of ferrous and nonferrous metals. MIC-7800 has a high degree of lubricity as well as corrosion protection and cooling properties. MIC-7800 does not stain metals.

PROPERTIES:
Appearance: Amber
Odor: Distinct
pH @ 1:5: 8.6
Cast Iron Chip Corrosion Test 1:50: Pass
Density: 8.4 lb./gal

USE PROCEDURE: MIC-7800 may be used straight from the drum or diluted by as much as 1:10 for light to medium duty stamping and light drawing applications. For grinding, tapping, turning, etc., MIC-7800 should be diluted from 1:20 to 1:50. MIC-7800 should be added to water to ensure proper mixing.

SAFETY DATA: MIC-7800 is slightly alkaline and may cause irritation to skin and eyes. If skin or eye contact occurs, flush affected area with water for 15 minutes. If irritation occurs or persists, seek medical attention. If irritation occurs due to inhalation of mists, move to fresh air. If irritation persists, seek medical attention immediately. If ingested, give two or three glasses of water to dilute and seek medical attention immediately.

 

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.