GENERAL
DESCRIPTION: MIC-7700 is a general purpose semi-synthetic
coolant designed for use on ferrous and nonferrous
metals. MIC-7700 has a high degree of lubricity
as well as corrosion protection and cooling properties.
PROPERTIES:
Appearance: Amber
Odor: Distinct
pH @ 1:50: 8.6
Cast Iron Chip Corrosion Test 1:50: Pass
Density: 8.4 lb./gal
USE PROCEDURE: MIC-7700 may be diluted from
1:10 to 1:50 depending upon the type and severity
of the application. MIC-7700 should be added to
water.
SAFETY DATA: MIC-7700 is slightly alkaline
and may cause irritation to skin and eyes. If skin
or eye contact occurs, flush affected area with
water for 15 minutes. If irritation occurs or persists,
seek medical attention. If irritation occurs due
to inhalation of mists, move to fresh air. If irritation
persists, seek medical attention immediately. If
ingested, give two or three glasses of water to
dilute and seek medical attention immediately.
The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.
