Michigan Industrial Coating, Inc.
Technical Data
 MIC-710LF

General Description: MIC-710LF is a highly concentrated, heavy duty, low foaming, alkaline cleaner designed for use in clean-in-place systems (CIP). MIC-710LF is formulated to remove such compounds as fats, oils, greases, and carbon build up. In addition, MIC-710LF has other uses such as smokehouse cleaning and boil outs. MIC-710LF has an A8 USDA Rating.

Properties:
Biodegradable: Yes
Density: 12.6 lb/gal
Foam: Very low
Odor: Slight
pH @ 1 %: 13.25
Freeze point: 60 deg F
Flash point: None
Phosphates: None
Wetting: Excellent
Rinsability: Complete

Use Procedure: MIC-710LF should be used in CIP systems, boil outs, and smokehouse cleaning at a concentration of 1:30 (3%) to 1:20 (5%) and a temperature range of 140°F to 160°F. If the CIP system is fully automated manufacturers recommended use levels should be used.

The above recommendations are guidelines that are known to work. Actual use concentrations will be dictated by the degree of soil present. Highly soiled systems may need higher concentrations of MIC-710LF.

Storage and Safety: Store container in a dry area above 60°F. Contains sodium hydroxide. Avoid contact with skin and eyes. DO NOT INGEST. When handling, wear rubber gloves, goggles and any other appropriate equipment or clothing to avoid skin contact. Avoid contact with clothing. Should contact occur, flush skin with water; for eyes, flood with large amounts of water for 15 minutes and get medical attention. If ingestion occurs, DO NOT INDUCE VOMITING. Drink fruit juice, milk or vinegar and get medical attention immediately. Read the Material Safety Data sheet before using.

 

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.