Michigan Industrial Coating, Inc.
Technical Data
 MIC-709

GENERAL DESCRIPTION: MIC-709 is a concentrated, heavy duty, alkaline cleaning compound designed to remove carbon, oils, greases and proteinaceous deposits. MIC-709 with increased detergency is heavily chelated and contains a high amount of free alkalinity, increasing its chemical activity by two fold. It can be used in central cleaning systems, soaking operations, immersion tanks, spray washers and recirculation systems. It can also be used for boil outs. MIC-709 has an A8 USDA Rating.

PROPERTIES:
Biodegradable: Yes, all surfactants
Density: 12.4 lbs./gal.
Emulsification: Rapid
Foaming: Moderate
Odor: Slight
Flash Point: None
pH @1%: 12.5
Phosphates: None
Rinsing: Complete
Stability: Excellent
Wetting Ability: Excellent

USE PROCEDURE: When the product is applied as a total liquid cleaning solution, normal use concentration is 2 to 3 ounces per gallon for industrial applications and in meat, poultry and food plants. Approximate use concentration when applied as a foam is 4 to 6 ounces per gallon. A boil out operation will require concentrations of approximately 4 to 6 ounces per gallon, depending on the degree of soil present. When MIC-709 is used in soaker tanks for immersion cleaning of parts and equipment, concentration will generally range between 4 to 6 ounces per gallon at a temperature of 140°F to 160°F for C.I.P. Lines and 160°F to 180°F for H.T.S.T. systems.

SAFETY DATA: Contains sodium hydroxide. Avoid contact with skin and eyes. DO NOT INGEST. When handling, wear rubber gloves, goggles and any other appropriate equipment or clothing to avoid skin contact. Avoid contact with clothing. Should contact occur, flush skin with water; for eyes, flood with large amounts of water for 15 minutes and get medical attention. If ingestion occurs, DO NOT INDUCE VOMITING. Drink fruit juice, milk or vinegar and get medical attention immediately. Read the Material Safety Data sheet before using.

 

 

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.