Michigan Industrial Coating, Inc.
Technical Data
 MIC-601F

GENERAL DESCRIPTION: MIC-601F is a heavy duty, biodegradable, stainless steel cleaner designed for in-place cleaning of vertical and other surfaces in meat processing and beverage plants. The foam produced from MIC-601F clings to any surface, thereby, increasing the contact time of the cleaner on the soil to be removed. MIC-601F has an A3 USDA rating.

MIC-601F is a concentrated phosphoric acid based cleaner containing surfactants and emulsifiers for rapid penetration of protein, lime, and other difficult to remove deposits. MIC-601F is safe on all types of stainless steel but mildly attacks common metals such as brass, iron, magnesium, and aluminum. It vigorously attacks zinc and galvanized coatings.

Foam generating cleaners reduce cost of labor, time, and amount of solution required for cleaning. It makes it easier to apply cleaning solutions while preventing the splashing experienced in spray cleaning.

PROPERTIES:
Emulsification: Rapid
pH: 2.5 at 1 oz./gal.
Wetting Ability: Excellent
Rinsing: Excellent
Specific Gravity: 9.42 lbs./gal.
Surfactants: Biodegradable
Foam: High, Stable

USE PROCEDURE: MIC-601F can be used from 1/4 oz. to 1 oz. per gallon, depending on the severity of the soil, the type of foam generating equipment used, and the density of foam desired. MIC-601F effectively removes milkstones, beerstones, mineral, and proteinaceous deposits, and light rust stains. Warm water increases chemical activity and cleaning. Rinse alkaline cleaned surfaces well before applying MIC-601F.

EQUIPMENT: Michigan Industrial Coating, Inc. offers a complete line of foam generators with safety features not found with stainless steel or other foam producing machines.

SAFETY DATA: Contains Phosphoric Acid. Avoid contact with skin and eyes. DO NOT INGEST. When handling, wear rubber gloves, goggles and any other appropriate equipment or clothing to avoid skin contact. Avoid contact with clothing. Should contact occur, flush skin with water; for eyes, flood with large amounts of water for 15 minutes and get medical attention. If ingestion occurs, DO NOT INDUCE VOMITING. Drink water to dilute and get medical attention immediately. Read the Material Safety Data sheet before using.

 

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.