MIC Industrial Coating, Inc.
Technical Data
 Take Off F

GENERAL DESCRIPTION: Take Off F is a highly concentrated, foaming, inhibited, liquid descaler. Take Off F is used for in-place cleaning of vertical surfaces. The foam produced by Take Off F clings to surfaces thus increasing contact time on the soil being removed. Take Off F is a replacement for concentrated Muriatic Acid and can be used on all surfaces except soft metals for the removal of lime, scale, soap scum and alkali films. Take Off F is excellent for cleaning boat hulls.

PROPERTIES:

Appearance: Amber
Odor: Acid, pungent
Foam: High, Stable
pH @ 10%: 0.4
Biodegradable: Yes
Density: 9.43 lb/gal

USE PROCEDURE: Take Off F can be used as is, or diluted as much as 1:6 depending on the amount and type of soil present. Take Off F can be applied by brush or dip, although, foaming is the most common method of application. Allow Take Off F to remain on surfaces for 5 to 15 minutes, then rinse well. For heavy accumulations allow for a contact time of up to 30 minutes. If the cleaned surface is to be painted, painting should occur as soon as the surface is dry. DO NOT use on soft metals.

MATERIAL SAFETY: Strong acid. Do not use on marble, terrazzo, or untreated stone. When using, always wear a face shield or goggles, rubber gloves, and protective clothing. Do not take internally. Contains concentrated Mineral Acid. Keep out of the reach of children.

SAFETY DATA: Contains Hydrochloric Acid, corrosion inhibitors and powerful penetrants. For skin contact, flush thoroughly with water. For eye contact, flush with water for at least 15 minutes. Call a physician at once. If taken internally, do not induce vomiting. Give a mild solution of milk of magnesia plaster, soap chips, bicarbonate of soda, or large amount of water or milk. Read the material Safety Data sheet on this product before using.

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Lily Products of Michigan, Inc. disclaims any liability in connection with the use of the data or suggestions.