Michigan Industrial Coating, Inc.
Technical Data
 Stripper S

GENERAL DESCRIPTION: Stripper S is a paint stripper formulated to quickly remove paint from metal parts without harming the metal. Special penetrants work to soften and penetrate the paint and lift it off the metal.

PROPERTIES:
Appearance: Clear Liquid
Odor: Mild
Solubility: Complete
Rinsability: Excellent
pH @ 20% 13.5
Density: 9.15 lb./gal.

USE PROCEDURE: Stripper S can be used in both spray or dip applications. It should be used at concentrations of 10% to 25% by volume and in a temperature range of 140°F to 200°F. The length of time required will depend on the type and thickness of the paint to be removed.

SAFETY DATA: Stripper S contains alkaline materials and should be handled with care. Stripper T may cause irritation and burning of skin and eyes. If product comes in contact with skin or eyes, flush area with water for 15 minutes. If irritation persists, seek medical attention. If ingested, dilute with two or three glasses of water and seek medical attention immediately. Do not induce vomiting. Read the Material Safety Data sheet on this product before using.

 

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.