Michigan Industrial Coating, Inc.
Technical Data
 Stripper 212 Plus

GENERAL DESCRIPTION: Stripper 212 Plus is a liquid hot tank paint stripper that is most effective in removing the more difficult finishes such as acrylics and epoxies. Tank life is exceptionally long due to a formulation that provides excellent high temperature stability. This formulation has the advantage of containing no phenols, cresylates, or volatile solvents and thus, can be disposed of as any high alkaline product. No toxic or obnoxious fumes are produced in production use. Water lost through evaporation can be carefully replaced to maintain solution strength and bath level.

PROPERTIES:
Appearance: Dark brown liquid
Odor: Mild
Flash Point: None
Boiling Point: Approximately 234°F
Alkalinity: Very High
Wetting: Excellent
Foaming: Low
Rinsability: Good
Stability: Excellent
Specific Gravity (H20=1): 1.24

USING PROCEDURE: Use straight or diluted with water. The most effective dilution is dependent upon the finish, temperature, and time. Safe on steel and copper metals; the latter may discolor with prolonged exposure time. Not safe on soft metals such as aluminum, galvanized steel, zinc die cast, and tin.

SAFETY DATA: Avoid contact with skin and eyes. Wear proper protective equipment. Should contact occur with skin, flush with water immediately. For eyes, flush with copious amounts of water for 15 minutes and get medical attention.

 

 

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.