Michigan Industrial Coating, Inc.
Technical Data
 MetGard WDO

GENERAL DESCRIPTION: MetGard WDO will displace water from metal parts and deposit a thin, oily, corrosion inhibiting film. It is generally used for protection of highly finished surfaces in indoor storage or transit where it will give many months protection (up to 12 months in some applications). Although designed for indoor protection, it is also used on parts in shed storage and in some cases may be used for short outdoor exposure.

WHERE TO USE: Tools, wire, die bearings, wire cloth, spark plugs, razor blades, piston rings, and other automotive parts and after Black Oxide or other metal finishing.

HOW TO USE: MetGard WDO is used as received. Although it is designed for a dip application, it may be sprayed or wiped on for its corrosion preventative properties. In a dip application, the water will displace an settle to the bottom of the tank. A spout at the tank bottom will easily drain displaced water when needed. MetGard WDO contains no metals except Calcium.

PROPERTIES:
Weight per Gallon: 7.45 Pounds
Flash Point: >300°F
Evaporation Rate (BuAc=1): Nil
Film Thickness (approx.): 0.5 Mils

PERFORMANCE: MetGard WDO is an outstanding, effective, water displacing, non-staining, rust preventative. MetGard WDO leaves an ultra thin film. Polished panels have passed 50+ days of 100% relative humidity at 120°F.

HANDLING AND STORAGE: As with all solvents, use with adequate ventilation. Keep away from heat and open flames.

SAFETY DATA: Read the MSDS for this product prior to use.

 

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.