Michigan Industrial Coating, Inc.
Technical Data
 MetClean 8LF

GENERAL DESCRIPTION: MetClean 8LF is a powerful lower foam degreaser that works where others fail. It is formulated with powerful detergents, surfactants, and penetrants for extremely tough jobs that require extra strength. Because of its high concentration, this product can be diluted with up to 100 parts water for greatest economy. MetClean 8LF may be used for dip tank degreasing or hot spray washing of metal parts. Superior grease and soil penetration and retention allow the degreaser to be used in many ways.

PROPERTIES:
Appearance: Green Liquid
Odor: Organic
Detergency: Excellent
Foaming: Low
Biodegradable: Yes
Wetting: Excellent
Solubility in Water: 100%
Flash Point: None
pH @10%: 12.5

USE PROCEDURE: For general maintenance such as, floors, walls and machinery, MetClean 8LF should be used in a concentration range of 2% to 6% by volume depending upon soil conditions. For use in dip tank degreasing MetClean 8LF should be used from 5% to 20% by volume in a temperature range of ambient to 180°F depending on soak time and the type and amount of soils to be removed. In spray washers MetClean 8LF is best used at a rate of 3% to 6% by volume in a temperature range of 140°F to 190°F.

SAFETY DATA: Warning: Skin and eye irritant. Harmful if swallowed. When using, wear face mask and/or goggles, protective gloves, and clothing. In case of accidental ingestion, immediately drink large volumes of water or milk. In case of eye or skin contact, wash with cold running water. In any case, get medical attention. For industrial and institutional use only. Read the Material Safety Data sheet on this product before using.

 

 

 

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.