GENERAL DESCRIPTION: MetClean 40 is a unique blend of chemicals that not only clean oils from metal parts, but also float the oils to the top of the bath. Due to this property, oils can be skimmed off the bath for reuse or recycling. What is left on the part is a thin protective film that provides short term corrosion protection..
PROPERTIES:
Appearance: Clear to Light Yellow Liquid
Odor: Sweet
pH: 10.5 @ 100%
Density: 8.79 lbs./gal.
Biodegradable: Yes
Foam: Low to Moderate
USE PROCEDURE: MetClean 40 should be used in an aqueous solution at levels of 2% to 4%. The temperature range for the solution should be from 140°F to 190°F.
MATERIAL SAFETY: Store in cool dry place away from oxidizers and strong acids. Keep drum closed when not in use. If contact occurs with eyes or skin, flush area with water for 15 minutes. If irritation occurs or persists, seek medical attention. If inhalation of mists occurs, move to fresh air. If irritation develops, seek medical attention. If ingested, drink 2 or 3 glasses of water and induce vomiting. Seek medical attention immediately.
The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.
