GENERAL DESCRIPTION: MetClean 15LF is an alkaline, silicated cleaner formulated for spray cleaning operations and vibratory systems. It can be used in a single or multi-stage spray wash. It contains a biodegradable surfactant that is effective in removing ordinary shop oils and soils. MetClean 15LF is an alkaline cleaner that is suitable for use in areas of hard water. It is safe on aluminum alloys and other soft metals. MetClean 15LF also contains a rust inhibitor that helps to prevent rust when parts are not rinsed.
PROPERTIES:
Appearance: Clear Liquid
pH: 13.2 at 100%
Specific Gravity: 9.1 lbs./gal.
Solubility: Rapid and Complete
Rinsability: Complete
USE PROCEDURE: Concentration is usually 1% to 5% by volume. The effective operating temperature range is 120°F to 160°F for pressure washers and ambient temperatures for vibratory systems. MetClean 15LF is recommended as a general purpose cleaner covering a wide range of water and soil conditions. It possesses low foaming characteristics that permit its use over a wide operating temperature range. MetClean 15LF can be used in a five stage Iron Phosphate Spray Washer System.
EQUIPMENT: All equipment for the use of MetClean 15LF can be of mild steel. Nozzles should be v-jet for maximum impingement. Stainless steel nozzles are preferred because of low maintenance and long life.
MATERIAL SAFETY: Safe on steel, aluminum and other soft metals.
SAFETY DATA: Do not take internally. Do not get in eyes, on skin, or on clothing. In case of contact with skin, flush with water. For eye contact, flush with water for at least 15 minutes and get medical attention. For further safety information, read the Material Safety Data sheet on this product before using.
The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.
