Michigan Industrial Coating, Inc.
Technical Data
 Mask Kote 1.5

GENERAL DESCRIPTION: Mask Kote 1.5 is an acrylic polymer emulsion designed for the purpose of providing a barrier to paint on various masks. Mask Kote 1.5 dries to a clear film and does not allow paint to penetrate through to the mask. Make Kote 1.5 is alkaline strippable which allows the mask to be cleaned by alkaline detergents or strippers. Mask Kote 1.5 is safe on all metals.

PROPERTIES:
Appearance: White Viscous Liquid
Odor: Low
pH: 8-9
Density: 8.34 lbs./gal.
Washability: Excellent
Percent Solids: 40%

USE PROCEDURE: Mask Kote 1.5 should be sprayed onto masks prior to use and allowed to dry. Ideally, the masks should be warn and dry. This will give a faster dry time.

SAFETY DATA: Do not take internally. May cause eye irritation. If irritation occurs on skin or eyes, flush with water for 15 minutes. If irritation persists, seek medical attention. If ingested, do not induce vomiting. Drink two or three glasses of water to dilute and seek medical attention immediately. Read the Material Safety Data sheet on this product before using.

 

 

 

The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.