GENERAL DESCRIPTION: Emulsion 20 is a proprietary blend of mineral oils, emulsifiers, and corrosion inhibitors. Emulsion 20 used at low levels will clean heavy oils and grime from parts while leaving a light oily coating that will provide superior corrosion protection. Emulsion 20 can also be used as a coolant in machine operations. It will keep machining tools cool while providing corrosion protection to both tools and parts. Emulsion 20 is anionic in character and is waste treatable in most in-plant waste treatment systems.
PROPERTIES:
Appearance: Clear Amber Liquid
Odor: Slight Petroleum
Solubility: Stable in milky white emulsion in water
pH: 7.5
Density: 7.59 lbs./gal.
Corrosion Protection: Passes ASTM grey cast iron chip test at a 1% concentration
USE PROCEDURE: Emulsion 20 should be used at 1% to 5% and at temperatures of ambient to 160°F for cleaning. Emulsion 20 should be used at levels of 2% to 5% and at ambient temperatures for machining applications.
SAFETY DATA: Emulsion 20 is practically non-toxic. However, if irritation should occur due to contact with eyes or skin, flush area for 15 minutes with water. If irritation persists, seek medical attention. If irritation occurs due to inhalation of mists, move to fresh air. If irritation persists, seek medical attention immediately. Read the Material Safety Data sheet for this product before using.
The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.
