GENERAL DESCRIPTION: Defoamer S is a concentrated organic polymeric defoamer formulated to rapidly knock down foam at temperatures above 75°F. Defoamer S can be used in a wide range of applications; and as it is so effective, can be used at very low concentrations.
PROPERTIES:
Appearance: Clear Liquid
Odor: Mild Odor
Density: 8.4 lb./gal.
Flash Point: 466°F
Cloud Point: 72°F
Active: 100%
Storage Temp: 70°F - 120°F
Water Soluability: Insoluble above cloud point
USE PROCEDURE: The proper concentration is best determined in the given operation. In most cases, however, it is better to add in many small doses rather than one large dose. Defoamer S can also be metered into solution. A good starting point would be 1:1000 and then getting stronger or weaker to find the optimum concentration. Bath temperatures should be at or above the cloud point for maximum effectiveness.
SAFETY DATA: Defoamer S is only slightly irritating when in contact with skin or eyes and moderately toxic when taken internally. If contact occurs on skin or in eyes, flush affected area with water for 15 minutes. If irritation does develop, seek medical attention. If ingested INDUCE VOMITING and get medical help immediately. READ MSDS completely before using product.
The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.
