GENERAL DESCRIPTION: Defoamer H is a concentrated solvent based defoamer that controls foam generated in a wide range of operations. Because it is so effective, the amount used is low and therefore, very economical.
PROPERTIES:
Appearance: Clear Liquid
Odor: Mild Solvent Odor
Density: 7.0 lb./gal.
Flash Point: 147°F
Active: 100%
Storage Temp: 70°F - 120°F
Water Solubility: Miscible
USE PROCEDURE: The proper amount of defoamer to be added is best determined at the operation. In most cases, the defoamer should be added in small amounts at intervals rather than one large addition.
Defoamer H is a clear amber organic liquid for use in industrial operations, such as water wash paint booths and spray washers. Use at 1:5000 to 1:20000.
SAFETY DATA: Combustible liquid. Keep away from heat, sparks, and flame. Avoid prolonged breathing of vapors. Do not take internally. Avoid contact with eyes and prolonged or repeated contact with skin. For eye contact, flush thoroughly with water for at least 15 minutes and get medical attention. Read the Material Safety Data sheet on this product before using.
The information contained in the bulletin is, to the best of our knowledge, true and accurate. All recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. Michigan Industrial Coating, Inc. disclaims any liability in connection with the use of the data or suggestions.
